What to do if the toilet fails to flush

What to do if the toilet fails to flush

In the past 10 days, "toilet flushing failure" has become a frequently searched keyword among the hot topics on home maintenance on the Internet. Many netizens reported that the toilet at home had insufficient flushing force, which seriously affected their daily life. This article will provide a structured solution to this problem, along with relevant statistics.

1. Common causes of inability to flush toilets

2. Step-by-step solution

1. Check and adjust the water level in the water tank

Open the toilet tank cover and observe whether the water level reaches the standard position (usually 2-3cm from the top of the tank). If the water level is insufficient, adjust the adjusting rod or screw of the float valve.

2. Clean the flush valve assembly

After closing the water inlet valve, remove the flush valve and soak it in white vinegar for 30 minutes to remove scale deposits. Check whether the sealing ring is aging and replace it with new parts if necessary.

3. Clear drainage pipes

Use a special toilet unclogger to perform 3-5 piston movements. For stubborn blockages, soak them in a 1:1 baking soda and vinegar solution for 1 hour and then rinse.

4. Check the water pressure

Use a pressure gauge to test the inlet water pressure. The standard value should be 0.1-0.4MPa. If the pressure is insufficient, check the household main water valve or install a booster pump.

3. Maintenance cost reference

4. Preventive measures

1. Clean the water tank with citric acid once a month
2. Avoid throwing items other than paper towels into the toilet
3. Replace water tank seals every 2 years
4. Install water quality filters to reduce scale deposits

5. When do you need professional help?

It is recommended to contact professional maintenance personnel when the following situations occur:
- Repeated attempts to unblock it still don’t work
- Hear unusual vibrations in water pipes
- Water seeping from the bottom of the toilet
- Water pressure issues throughout the building

According to the statistics of maintenance data in the past 10 days, 90% of toilet flushing problems can be solved by the above method. It is recommended to start with the simplest water level adjustment and gradually eliminate the cause of the fault. Regular maintenance can reduce the failure rate by 75% and save maintenance costs.

If the problem persists, you can take a video to record the fault phenomenon and consult a professional plumber for targeted advice. Remember to turn off the water source when handling to avoid water leakage accidents caused by improper operation.